EQUIPMENT SERIES

T8-1X Vibration Controller

Close the feedback loop between an electrodynamic or hydraulic shaker, its power amplifier and vibration sensors.

T8-1X

Compare models Inquire about this series

APPLICATIONS

Where it fits

Close the feedback loop between an electrodynamic or hydraulic shaker, its power amplifier and vibration sensors.

SYSTEM DETAILS

Equipment and functions

Modular control software for sine, random and shock tests.
Data recording and replay, user-defined curves and Word, Excel or PDF reporting.
A standalone simulation mode supports parameter preparation and teaching.
A chassis version with two outputs and built-in charge amplification is illustrated; confirm the required hardware version.

SELECT A MODEL

Specifications & configurations

Compare models side by side. On smaller screens, swipe within the table; the parameter column stays in place.

Catalog specifications are shown for model selection. Confirm the configuration, units and test conditions in your quotation. Fields marked “Confirmation required” need an agreed specification before ordering.

T8-1X hardware
Parameter	T8-1X
Input channels	Confirmation required
Sensor inputs	Direct voltage input, IEPE/ICP
Drive outputs	1–2
Sampling rate	102.4 kHz; 1 MHz optional
A/D resolution (bit)	24
Dynamic range (dB)	≥110
Control frequency range (Hz)	1–10000
Amplitude accuracy	0.02 dB at 1000 Hz
Frequency accuracy	25 ppm at 1000 Hz
Harmonic distortion	−100 dB at 1000 Hz
Computer interface	USB 2.0 / 3.0
Power adapter	110–240 VAC, 50–60 Hz
Portable enclosure (L × W × H)	19 × 17 × 3.3 cm (7.5 × 6.7 × 1.3 in)
Operating systems listed by catalog	Windows XP / 7 / 8 / 10, 32-/64-bit
Interface language	Chinese (catalog edition)

SYSTEM DETAILS

Software & control functions

Select the required functions with the hardware configuration. Extended and optional modules are not assumed to be included.

Base control

Sine (SIN): Fixed-frequency sine; logarithmic and linear swept sine.
Broadband random (RAN): PSD control with 200–12800 spectral lines; kurtosis control supported.
Classical shock (SHOCK): Half-sine, initial-peak sawtooth, terminal-peak sawtooth, trapezoidal and triangular pulses.

Extended control — confirm selected modules

Resonance search and dwell (RSTD): Search by amplitude ratio or Q; resonance dwell or tracking.
Shock response spectrum (SRS): SRS fitting for specified shock-response requirements. Confirm the synthesis method and supported pulse duration.
Random-on-random (RnR): 20 independent narrow bands, sweep and out-of-band control.
Sine-on-random (source code RnS): Combined random and sine control. Confirm the number of tones, bands and their configuration.
Random plus random plus sine (RRS): 6 + 6 independent narrow bands; sweep and out-of-band control.
Long time-history reproduction (LTH): Waveform cropping; 20–2000 Hz; up to 20 hours of waveform data; looped replay.
Transient time history (TTH): Waveform cropping and compensation; 0.1–400 ms pulse-width range.
Fast shock: A control option with performance to be confirmed for the configuration.

BEFORE ORDERING

Configuration & confirmation notes

Confirm the input-channel count for the ordered hardware configuration.
Confirm USB interface version, charge-input hardware and software language. The listed catalog edition uses a Chinese interface.
Extended control functions require the selected modules and compatible hardware. Current operating-system compatibility must be confirmed.